ECX Circuit Manuel d'instructions télécharger pdf (Page 8)

• ALWAYSturnonyourtransmitterbeforeyouturnonthe

receiver in the vehicle. Always power off the receiver before

turning your transmitter off.

• ALWAYSoperateyourvehicleinawideopenarea.Operating

the vehicle in a small space or indoors can cause overheating

atlowspeeds.Operatingatlowspeedincreasesheatinthe

electronicspeedcontrol(ESC).Overheatingcandamagethe

vehicle and failure may result.

OPERATION

WHEN YOU ARE FINISHED

•Seatthemotorbrushesbydrivingsmoothlyonaflatsurface

during use of the first battery charge. Failing to do so can

greatly reduce motor performance and functional life.

•Prolongmotorlifebypreventingoverheatingconditions.

Unduemotorwearresultsfromfrequentturns,stopsand

starts, pushing objects, driving in water and tall grass,

and driving continuously up hill.

•Over-temperatureprotectionisinstalledontheESCto

prevent circuit damage, but cannot protect the motor from

driving against heavy resistance.

MOTOR CARE

1. Power off the Electronic

Speed Control (ESC).

2. Disconnect the battery.

4. Remove the battery from the vehicle.

3.Poweroffthetransmitter.

5. Recharge the battery.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

ECX Circuit Manuel d'instructions Page 8